Martin MAC 350 Entour User Manual page 20

Any of the six rotating gobos can be selected at an indexed angle, rotated, or shaken from side to side at an
indexed angle or while rotating. The entire gobo wheel can also be scrolled continuously, and gobos set to
music triggered gobo chase.
Iris
The motorized iris can be opened or closed smoothly, with pulse effects also available.
Focus
The motorized focus system can be varied from infinity to approximately 2 meters (6.4 feet).
Macros
Macros are pre-programmed sequences stored in the fixture's memory that can reduce the need for
programming. The MAC 350 Entour has 10 pan/tilt and 10 effects macros available. Pan/tilt and effects
macros are selected separately and can therefore be run in any combination.
Pan/tilt macros
1. Circle large CW
2. Pan wave large CW
3. Tilt wave large CW
4. Circle small CCW
5. Pan wave small CCW
6. Tilt wave small CCW
7. Large move slow CW
8. Large move slow CCW
9. Large move fast CW
10. Large move fast CCW
Macro chase/staggered start feature
Each macro can be started:
• at the beginning of its sequence by selecting 1.1, 2.1, 3.1, etc.
• 25% of the way through its sequence by selecting 1.2, 2.2, 3.2, etc.
• 50% of the way through its sequence by selecting 1.3, 2.3, 3.3, etc.
• 75% of the way through its sequence by selecting 1.4, 2.4, 3.4, etc.
This feature makes it possible to run the same macro in multiple fixtures with staggered starting points (i.e.
fixtures reach the start of the macro one after the other), so that the macro appears to run in a chase.
For example, if you have four MAC 350 Entour fixtures side by side and you set the first fixture to run macro
1.1, the next fixture to run macro 1.2, the next to run macro 1.3 and the last to run macro 1.4, and you start
all fixtures running their macro at the same time, the fixtures will run macro 1 in a chase.
Note that a regular macro chase requires that all fixtures start their macro at exactly the same time so that
they reach the start of the macro at regular intervals. Macro chases are therefore primarily intended for use
with DMX control, but they can be programmed in synchronized stand-alone operation.
Pan and tilt
The MAC 350 Entour's moving head can be panned through 630° and tilted through 300°.
Music trig sensitivity
The MAC 350 Entour's music trig sensor uses automatic gain control to match the fixture's sensitivity to the
music beat. Adjustment is not necessary.
20
Effects macros
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Color scroll
Table 2. List of macros
MAC 350 Entour user manual
Shutter chase
Single color bump
Two color bump
Single gobo bump
Index/rotate FX
Focus sine wave
Camera flash
Shutter fade
Gobo wheels scroll bounce