Pulley Guard - BOMBARDIER 1983 Shop Manual

c
DISASSEMBLY AND ASSEMBLY
O
NOTE: For additional information (ex.: exploded
view) refer to the 1983 correspondent parts cata-
logue .
•
WARNING: Engine should be running only when
belt guard and/or pulley guard are well secured in
place .
Elan, Spirit and Alpine models
The length of the uncompressed retaining pin spring
should not be less than 47 mm (1 7/8").
An uncompressed front guard spring should not be less
than 20 mm
(13/ 16").
When assembling adjust length to
17 mm
(11/16").
~ ~
17 mm
Check condition of any retaining coil pin. Replace any
damaged parts.
Prior to installation, ensure that pulley guard and frame
bracket are 90 0 with frame.
No free-pl ay
•
WARNING: No lateral free-play should exist be-
tween drive pulley guard and frame bracket.
SECTION 03 TRANSMISSION
SUB-SECTION 01 (PULLEY GUARD)
PULLEY GUARD
PAGE 149