Chapter 3 Setting Monitor; Adjusting Volume; Selecting Sound Source While Using The Displayport Signal Input; Enabling / Disabling Ddc/Ci Communication - Eizo FlexScan EV2736W User Manual

Chapter 3 Setting Monitor

3-1. Adjusting Volume

This function allows you to adjust the volume.
Adjustable range
0 to 30
Procedure
1. Press .
2. Use or for adjustment.
3. Press to exit.
Note
• The volume for the speakers and the headphone can be set individually.
3-2. Selecting sound source while using the DisplayPort
signal input
This function allows you to switch sound source during DisplayPort signal input. You can select the Stereo Mini
Jack or DisplayPort.
Procedure
1. Choose "Sound" in the Setting menu, and press
2. Choose "Source" in the "Sound" menu, and press
The "Source" menu appears.
3. Select "Stereo Mini Jack" or "DisplayPort" with
4. Press to exit.
Note
• This function is available with DisplayPort signal input.

3-3. Enabling / Disabling DDC/CI communication

This function allows you to enable / disable the DDC/CI communication (see
Procedure
1. Choose "Monitor Settings" in the Setting menu, and press
2. Choose "DDC/CI" in the "Monitor Settings" menu, and press
The "DDC/CI" menu appears.
3. Select "On" or "Off" with
4. Press to exit.
Note
• The DisplayPort input of this monitor does not support DDC/CI communication.
22
Chapter3SettingMonitor
or .
or .
.
.
"6-8. Glossary" (page
.
.
45)).