Adjusting Color; To Select The Display Mode (Finecontrast Mode); To Perform Advanced Adjustments - Eizo FlexScan EV2736W User Manual

2-3. Adjusting Color

●

To select the display mode (FineContrast Mode)

This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode
User1
User2
sRGB
Paper
Movie
Procedure
1. Press .
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time
You can switch the mode with
Note
• The Setting menu and the Mode menu cannot be displayed at the same time.
• "ScreenManager Pro for LCD (DDC/CI)" allows you to select the FineContrast mode automatically according to the
application used (see "Chapter 3 Auto FineContrast" in the "ScreenManager Pro for LCD (DDC/CI)" User's Manual).
●

To perform advanced adjustments

The "Color" menu of the Setting menu allows you to set and save the independent color adjustment for each
mode.
Attention
• It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more after the
monitor power has been turned on, and then adjust the monitor.
• The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics. Make
fine color adjustment visually when matching colors on multiple monitors.
Note
• Using the "ScreenManager Pro for LCD (DDC/CI)" allows you to perform the color adjustment by using the mouse and
keyboard of your PC. (Refer to "Chapter 4 Color Adjustment" in the User's Manual for "ScreenManager Pro for LCD
(DDC/CI)".)
Selectthistodefineadesiredsetofparametersettings.
SuitableforcolormatchingwithsRGBcompatibleperipherals.
Producesaprintedpapereffect.Suitablefordisplayingimagesfrommediasuchasbooks
anddocuments.
Suitableforplayingbackanimatedimages.
Themodemenu
appears.
or while the mode menu is displayed.
→User1←→User2←→sRGB←→Paper←→Movie←
Purpose
is pressed.
Chapter2AdjustingScreens
15