Cd Changer Operation (Optional); Controlling Cd Changer; Music Sensor (Skip); Fast Forward And Backward - Alpine XMA-T200RF Owner's Manual

CD Changer Operation (Optional)

)
SOURCE
3 4
(

Controlling CD Changer

An optional CD Changer may be connected to the XMA-
T200RF if it is Ai-NET compatible. With a CD Changer
connected to the Ai-NET input of the XMA-T200RF, the
CD Changer will be controllable from the XMA-T200RF.
Using the KCA-400C (Multi-Changer Switching device) or
the KCA-410C (Versatile Link Terminal) multiple
changers can be controlled by the XMA-T200RF.
See the Multi-Changer Selection section on page 11 for
selecting the CD Changers.
NOTES
• The controls on the XMA-T200RF for CD Changer operation
are operative only when a CD Changer is connected.
• The DVD changer (optional) is controllable from the XMA-
T200RF as well as the CD changer.
1
Press the SOURCE button of the Remote Display or
the Remote Control to activate the CHANGER mode.
Select the FM band.
Tune to the same frequency you selected on the
Modulator Unit and adjust for the desired volume level.
The display shows the disc number and track number.
2
Press the 4 or 3 button of the Remote Display, or
press the 8 or 9 button of the Remote Control until
your desired disc number appears in the display. The
track number will also appear in the display.
To pause playback, press the -/J button on the
Remote Control.
Pressing the -/J button again will resume playback.
10
-EN
Rotary encoder
<Remote Display>

Music Sensor (Skip)

1

Fast Forward and Backward

1

Repeat Play

1
SOURCE
g
-/J
M.I.X.
SCAN
<Remote Control>
Turn the rotary encoder of the Remote Display to the
left, or press the g button of the Remote Control
once during CD play to return to the beginning of the
current track. If you wish to access the beginning of a
track further back, repeatedly press until you reach the
desired track.
Turn the rotary encoder of the Remote Display to the
right, or press the f button of the Remote Control
once to advance to the beginning of the next track. If
you wish to access the beginning of a track further
ahead, press repeatedly until the desired track is
reached.
NOTE
The music sensor feature is functional in the play or pause
mode.
Press the ( or ) button of the Remote Display, or
press and hold the g or f button of the Remote
Control to quickly move backward or forward until you
reach the desired section of the track.
Press the REPEAT button of the Remote Control to
play back repeatedly the track being played.
The track will be played repeatedly.
The RPT ALL mode is selected, the unit repeatedly
plays back all tracks on the disc selected.
→ RPT → RPT ALL → (off)
Press the REPEAT button and select OFF to
deactivate the repeat play.
BAND
8
f
9
REPEAT