Using Coded Speed Dialing - Canon FAX-L380 User Manual

7
To change additional numbers and/or names, repeat steps 2 to 6.
-or-
If you have finished changing numbers and/or names, press [Stop/Reset] to return to standby mode.

Using Coded Speed Dialing

Once you have registered your numbers under Coded Speed Dialing codes, you can send documents
as follows:
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents,
see "Document Requirements," on p. 6-1, and "Loading Documents in the ADF," on p. 6-3.
2
Press [FAX].
5
If you are already in the Fax standby mode, you can skip this step.
3
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See "Adjusting the Image Quality (Resolution)," on p. 6-4.)
• Press [Exposure] to select the scan density. (See "Adjusting the Exposure (Density)," on p. 6-5.)
4
Press [Coded Dial]
which you wish to fax.
TEL=
• The name registered under that Coded Speed Dialing code is displayed. If no name is registered, the number
registered under that code will be displayed.
• If you mistakenly enter the wrong code, press [Stop/Reset]
• If no fax number is assigned to the Coded Speed Dialing code you press, the LCD displays <NOT
REGISTERED>. If this happens, make sure you enter the correct code and that the number you want to dial is
registered under that code.
5
Press [Start].
• If you do not press [Start] within 5 seconds of entering the Coded Speed Dialing code, the machine will begin
sending automatically. If you do not want the machine to send automatically, you need to change the <TIME
OUT> setting. See p. 15-9 for more details.
• If an error occurs during sending, the machine will print an error report. If this happens, try sending the fax
again. See "Faxing Problems," on p. 13-13 for details about errors.
NOTE
You can also use Coded Speed Dialing to send a document to more than one location at a time. For details,
see "Group Dialing," on p. 5-8, and "Sequential Broadcasting," on p. 6-13.
Coded Speed Dialing
5-7
use the numeric buttons to enter the two-digit code assigned to the number to
TEL=
04 Canon CANADA
456xxxx
[Coded Dial] enter the correct code.