Canon FAX-L380 User Manual page 50

3
Run a pen or other rounded object along the back flaps to flatten them.
The flaps should not bulge more than 5 mm.
4
Tap the edges on a flat surface to even the envelopes.
5
Pull out the cassette completely.
4
6
Pinch and slide the length slide guide to fit the size of the envelopes you want to load.
IMPORTANT
If the slide guides are not adjusted correctly for the size of the envelopes, the quality of your printouts may be
adversely affected.
7
Load the envelopes with the print side down and the right edge (i.e., closer to the stamp) first.
If the envelope to be loaded has a flap on the short edge, this edge must enter the machine first. Not loading it
this way will result in a paper jam.
Loading Paper
4-6
FLAP