Programmable Features
Any references in this manual to controls that are
"preprogrammed" mean that a qualified radio technician must
use the radio's programming software to assign a feature to a
control.
Your dealer can program the programmable buttons or keypad
as shortcuts to radio functions or preset channels/groups
depending on the duration of a button press:
•
Press
–
Pressing and releasing rapidly.
•
Long press
–
Pressing and holding for the preprogrammed
duration (between 0.25 seconds and 3.75 seconds).
•
Hold down
–
Keeping the button pressed.
Assignable Radio Functions
Call Alert
–
Allows the radio to function like a pager, or to verify
if a radio is active on the system.
Call Response
–
Allows you to answer a private call.
Channel
–
Selects a channel.
Dynamic Priority
–
Allows any channel in a scan list (except for
the priority-one channel) to temporarily replace the priority-two
channel.
8
English
Emergency
–
Depending on the programming, initiates or
cancels an emergency alarm or call.
Monitor
–
Monitors a selected channel for all radio traffic until
function is disabled.
Nuisance Delete
–
Temporarily removes an unwanted channel,
except for priority channels or the designated transmit channel,
from the scan list. The designated transmit channel refers to the
user's selected zone/channel combination from which scan is
initiated.
Phone
–
Allows you to make and receive calls similar to
standard phone calls.
PL Defeat
–
Overrides any coded squelch (DPL or PL) that is
preprogrammed to a channel.
Private Call
–
Allows a call from an individual radio to another
individual radio.
Repeater/Direct
–
Toggles between using a repeater and
communicating directly with another radio.
Reprogram Request
–
Notifies the dispatcher that you want a
new dynamic regrouping assignment.
Scan List Programming
–
Selects the scan list for editing.
Scan On/Off
–
Toggles scan on or off.