Setting The Time-Out Timer; Setting The Time And Date; Editing The Time And Date - Motorola ASTRO APX 7000 Series Quick Reference Card

OR
Follow the procedure below.
< >
1 to Mute.
or
Press the Menu Select button directly below Mute.
2
The display momentarily shows Tones off, indicating that
3
the keypad tones are disabled.
OR
The display momentarily shows Tones On, and a short tone
sounds, indicating that the keypad tones are enabled.

Setting the Time-Out Timer

This feature turns off your radio's transmitter. You cannot
transmit longer than the preset timer setting.
If you attempt to do so, the radio automatically stops your
transmission, and you hear a talk-prohibit tone.
The radio also automatically exits the feature, if the radio is left
idle, when time is up. You will hear the Menu Inactive Exit Tone
upon feature exit (if enabled).
The timer is defaulted at 60 seconds, but it can be
preprogrammed from 3 to 120 seconds, in 15-second intervals,
or it can be disabled entirely for each radio mode, by a qualified
radio technician.
Note: You will hear a brief, low-pitched, warning tone four
seconds before the transmission times out.
78
English
Procedure:
1
Hold down the PTT button longer than the preprogrammed
time. You hear a short, low-pitched warning tone, the
transmission is cut-off, and the LED goes out until you
release the PTT button.
2
Release the PTT button. The LED relights and the timer
resets.
3
Press the PTT button to re-transmit. The time-out timer
restarts and the LED lights up solid red.

Setting the Time and Date

You can set the time and date for your radio.
Settings:
•
The default time setting is a 12-hour clock.The display shows
12:00AM.
•
The AM/PM selection is not available for the 24-hour clock
setting.
The default setting for the domestic date shows Day/Mth/Yr.
•
Note: Check with your dealer or system administrator for
additional programmable settings for this feature.

Editing the Time and Date