Sending A Status Call (Astro 25 Trunking Only); Using The Dynamic Regrouping Feature (Trunking Only); Use This Navigation Guide To Learn More About Advanced Features Available With Your Radio: Advanced Call Features - Motorola ASTRO APX 7000 Series Quick Reference Card

Digital portable radios
Hide thumbs Also See for ASTRO APX 7000 Series:
Table of Contents

Advertisement

Press the Menu Select button directly below Pset to select
the preset preprogrammed talkgroup.
5
If the encryption key slaved to the new talkgroup is erased,
a momentary key fail tone sounds and the display shows
Key fail.
OR
If the encryption key that is slaved to the new talkgroup is
not allowed, a momentary key fail tone sounds and the
display shows Illegal Key.
H
6
Press
or the PTT button to exit.
OR
Turn the 16-Position Select knob to exit.

Sending a Status Call (ASTRO 25 Trunking Only)

This feature allows you to send data calls to the dispatcher
about a predefined status.
Note:
Each status can have up to a 12-character name. A
maximum of eight status conditions is possible.
Procedure:
Press the preprogrammed Status button and proceed to Step 3
of the procedure below.
OR
Follow the procedure below.
<
>
1
to Sts.
or
Press the Menu Select button directly below Sts.
2
3
The display shows the last acknowledged status call, or the
first status in the list.
U
D
4
or
to the required status.
OR
Use the keypad to enter a number corresponding to the
location in the status list.
5
Press the PTT button to send the status.
6
When the dispatcher acknowledges, four tones sound and
the display shows Ack Received. The radio returns to
normal dispatch operation.
OR
If no acknowledgment is received, a low-pitched tone
sounds and the display shows No Acknowldg.
H
7
Press
to return to the home display.
No traffic is heard on trunked channels while Status Calls is
selected.
If the radio detects no Status Call activity for six seconds, an
alert tone sounds until you press
Using the Dynamic Regrouping Feature (Trunking
Only)
This feature allows the dispatcher to temporarily reassign
selected radios to a single special channel so they can
communicate with each other. This feature is typically used
H
or the PTT button.
English
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents