Installation; Installing The Loud Hailer - Furuno LH-5000 Operator's Manual

LH-5000 Operator's Manual

1. Installation

1.1

Installing the Loud Hailer

For desktop mounting
Put the hanger in a location where it is easy to install the LH-5000
Step 1
Loud Hailer.
Fix the hanger with four screws.
Step 2
Set the loud hailer to the hanger.
Step 3
Tighten the knob bolts on both sides of the hanger.
Step 4
Connect the intercom speaker to the loud hailer using the color-coded
Step 5
signal cable.
Make sure that every signal cable is firmly connected.
Attach the microphone to the front microphone connector on the loud
Step 6
hailer.
Connect the power cord properly.
Step 7
5
Installation