Error Messages - Excell SK-VET Service Manual

EXCELL PRECISION CO., LTD
Selectable Weight Units and Piece Unit:
Kilogram
Gram
Pound
Pound/Ounce (lb, oz)
Ounce

Error Messages:

⇒
The EEPROM memory is not working correctly.
⇒
Zero is higher than the zero range when switching the scale on.
⇒
Zero is lower than the zero range when switching the scale on.
⇒
A/D value is unstable. When switching the scale on or pressing the
or the
⇒
A/D value is less than -31250.
⇒
A/D IC malfunction (cannot read A/D value). The load cell may not be connected to
the scale correctly.
⇒
A/D value is higher than +31250.
⇒
The weight of the object is over the maximum capacity + 9 divisions.
⇒
After calibration the displayed resolution is greater than the internal resolution.
⇒
The gravity value is outside the range 9.772 ~ 9.829.
⇒
Error setting.
⇒
⇒
SK-VET V1.0
(kg)
(g)
(lb)
(oz)
key, the A/D value is unstable for at least 20 seconds.
TARE
The weight value is greater than the zero range, when re-zeroing the
scale.
The weight value is below the zero range, when re-zeroing the scale.
.
1 g = 0.001 kg
1 g = 1 g
1 g = 0.002204623 lb
1 g = 0.03527396 oz
1 g = 0.03527396 oz
5
key
ON/ZERO
SME300000067