Excell SK-VET Service Manual page 13

EXCELL PRECISION CO., LTD
NOTE 1
The users can set up the different weight units in various orders according to their
preference, and the amount of the chosen weight units can be up to 4.
(a) (b) (c)
(a) ⇒ The first weight unit (only "kg", or "lb" are available to choose from).
(b) ⇒ The second weight unit (select one of the parameters listed below).
(c) ⇒ The third weight unit (select one of the parameters listed below).
(e) ⇒ The amount of the weight units selected (select one of parameters 1 ~ 3).
Parameter descriptions:
\
0 ⇒ kg 2 ⇒ lb
1 ⇒ g 4 ⇒ lb / oz
Hints and Tips:
Ø When the first unit is set to lb, the second unit will be kg or g.
For example:
Select two weight unit kg and lb. when choosing kg as calibration weight unit, please input
02002
NOTE 2
Enter the maximum capacity of the scale, total 5 digits
(f) ( g ) ( h ) ( i) (j)
For example:
300.0 kg ⇒ Key in 03000
NOTE 3
Set the division size and decimal point position to determine the display resolution
(k) ( l ) ( m )
(k) ⇒ Division size (select 1, 2, or 5)
(l) ⇒ The number of decimal places (0 ~ 5)
For example:
15.000 kg ⇒ enter 3
1500.0 g ⇒ enter 1
(m) ⇒ range setting (select one of parameters 0, 1, or 2)
For example:
0 &1 ⇒ full range, 2 ⇒ dual range (divided at 1/2 of the full scale)
SK-VET V1.0
.
(e)
11
5 ⇒ oz
SME300000067