During Calls; Holding And Resuming Calls - Polycom SoundStation Duo User Manual

During Calls

Holding and Resuming Calls

Note
Polycom, Inc.
During a call, you can:
• Place the call on hold.
• Set up a conference call between yourself, the party you're talking to, and
another party.
If call waiting is enabled on your phone, you can also answer an incoming call
(see Answering When You Have an Active or Held Call
For information on placing computer or mobile phone audio on hold, see
Connecting Mobile Phone and Computer Audio
You can place a call on hold. When a call is on hold, the indicator lights flash
red, and the Hold icon displays in the status bar, as shown next. If a call is held,
you can't hear the far-site, and the far-site can't hear you.
Hold icon
To hold an active call:
>> During the call, press the Hold soft key.
To hold an active call when you have a held call:
>> Press or the Cnfrnc soft key to activate a hook flash.
The call you were in is held, and the held call becomes the active call.
To resume a held call:
>> While a call is on hold, press the Resume soft key.
To resume a held call when you're in a call:
>> Press or the Cnfrnc soft key to activate a hook flash.
The held call becomes the active call, and the call you were in is held.
Using Your Conference Phone in PSTN Mode
on page 25).
on page 38.
29