Gateway Solo 5100 Maintaining & Troubleshooting page 89

Print queue is full
Printer is out of paper
Required parameter missing
Syntax error
Time and date not set
Write protect error
88 Maintaining and Troubleshooting Your Solo Notebook
Wait until some files have been printed before sending additional files to the
printer. Make sure the printer is not set to work "off-line." If you print large or
many files at one time to the printer you may want to add additional memory to
the printer. Consult the printer documentation for instructions for adding
additional memory.
Make sure the printer is turned on, then add paper to the printer. After adding
paper, make sure the printer is "online." Most printers have an "online/offline"
button you need to press after adding paper.
Carefully re-enter the command and check the spelling. To exit from MS-DOS
to Windows 95 type exit and press <Enter>.
Re-type the command and make sure the command is spelled correctly and any
other parts of the command are. To exit from MS-DOS, type exit and press
<Enter>.
The internal battery that keeps the clock/calendar going ran completely down.
This can happen if you leave the battery pack out of your notebook or fully
discharged for a day or more. To correct the problem, restart the computer and
press <F2> to enter the Setup Program. At the Main menu, change the time
and/or date to the proper settings. After changing the settings, go to the Exit
menu and save the changes.
Remove the write protection or use another diskette. To remove the write
protection from the diskette, slide the tab over the hole on the back of the
diskette.