Charging The Battery; Starting Up; Turning Your Device On And Off - HTC T-Mobile touch pro2 User Manual

1.3 Charging the Battery

New batteries are shipped partially charged. Before you start using your device, it is
recommended that you install and charge the battery. Some batteries perform best
after several full charge/discharge cycles.
Note
Only the AC adapter and USB sync cable provided with your device must be used to
charge the device.
Connect the USB connector of the AC adapter to the sync connector on your
device, and then plug in the AC adapter to an electrical outlet to start charging the
battery.
Charging is indicated by a solid amber light on the Notification LED. As the battery
is being charged while the device is on, a charging icon
bar of the Home screen. After the battery has been fully charged, a full battery icon
appears in the title bar of the Home screen.
Warning!

1.4 Starting Up

After installing your SIM card and battery and charging the battery, you can now
power on and start using your device.

Turning your device on and off

To turn on the device
Press the POWER button.
To turn off the device
1.
Press and hold the POWER button for a few seconds.
2.
Tap Yes when prompted.
• Do not remove the battery from the device while you are charging it using
the AC or car adapter.
• As a safety precaution, the battery stops charging before it overheats.
Getting Started 9
also appears in the title