Vitodens 200-W, B2HA 19 to 80 Technical Data
Standard Equipment
The Vitodens 200-W gas-fired condensing boiler with
Inox-Radial heat exchanger, modulating MatriX cylinder
burner for liquid propane gas and natural gas (available
on all models), comes standard with:
pressure gage
■
installation fittings with 30 psig pressure
■
relief valve and air vent (no air vent for
model B2HA 80)
boiler control unit with outdoor
■
temperature sensor, power/pump module
- The boiler comes prewired and fully piped
internally for field connections and prewired.
- Side wall co-axial vent installations must include
Viessmann protective screen!
- Enclosure finish:
black steel, powder-coated white
- The Vitodens 200-W comes ready for use
with natural gas and can be fuel
converted to liquid propane gas in the field.
- Power/Pump module
Wall mounting componentry
The following wall mounting components are supplied
with the Vitodens 200-W boiler:
Mounting bracket
■
Mounting bolts
■
Installation fittings
■
Screws for mounting bracket on
■
- wood studs (2" x 4")
- metal studs
- brick/concrete wall
Standard Equipment
37