York HA090 Technical Manual page 150

FIGURE 1 - UNIT DIMENSIONS KEU060
ACCESSORIES
• ELECTRIC HEATER - Add 13" to unit height when used.
• SUPPLY AIR PLENUM - Add 24-1/4" to unit height when used.
• BASE - Add 20" to unit height when used.
TABLE 18: UNIT CLEARANCES KEU060
MINIMUM CLEARANCES
Side with RETURN AIR opening
Side with SUPPLY AIR opening
Side with PIPING CONNECTIONS
Side opposite with PIPING CONNECTIONS
Side with access for both POWER & CONTROL
3,
WIRING
4
Bottom
16
http://www.rezine.net
060
24"
1
24"
2
36"
12"
-
-
1. Overall dimensions of the unit will vary if an electric
heater, a supply air plenum or a base is used.
2. This dimension is required for removal of the coil. Only
26" is required for normal service.
3. Although no clearance is required for service and oper-
ation, some clearance may be required for routing the
power and control wiring.
4. Allow enough clearance to trap the condensate drain
line.
Page 150
246668-YTG-B-0906
All dimensions are in inches. They are
subject to change without notice. Certi-
fied dimensions will be provided upon
request.
Unitary Products Group