Troubleshooting - Axis 5900 Quick Installation Manual

AXIS 5900

Troubleshooting

Check the following if you experience problems when trying to print over the WLAN:
The Network Mode parameter must be set to Auto Sense or WLAN. This parameter is set on
•
the admin | General Settings page.
Your web browser must have Java (JVM) enabled (for the WEP security functionality)
•
Check that the WLAN network interface is properly configured in the workstation/laptop try-
•
ing to access the AXIS 5900 print server.
All communicating clients must be in the same operating mode, i.e. ad hoc or infrastructure
•
mode.
Note:
In Macintosh environments, the ad hoc mode is referred to as computer to computer mode and the
infrastructure mode is referred to as Airport network.
Check that the SSID and the WEP keys are set according to your WLAN network settings. See
•
WLAN Parameters on page 13 for more information.
Check that the radio frequency channel setting is the same on all communicating clients and
•
that the channel is set according to the requirements in your country.
Frequency bands and channels:
Country
Europe
France
Japan
US/Canada
* (France) outdoor use permitted on private property with prior authorization
Frequency Available Channels
2.412-2.472 GHz 1-13
2.457-2.472 GHz 10-13 (indoor use*)
2.484 GHz 14
2.412-2.462 GHz 1-11
Troubleshooting
Default Channel
11
11
14
11
21