Wep Parameters - Axis 5900 Quick Installation Manual

Configuring the AXIS 5900 for wireless printing
14

WEP Parameters

1. Click the Edit WEP Parameters button. You will be prompted
for the root password (default pass).
2. Edit the WEP parameters and click OK to save your settings.
WEP Parameters
Edit WEP Parameters
WEP Encryption Level
Active WEP key
WEP key x
Enforce WEP
Note:
Once you have clicked the OK button, the WEP parameter settings will be saved and will not be
cancelled by clicking Cancel on the WLAN page.
Once you have entered the WLAN settings to match your network, click OK. For the new
settings to take effect, restart the AXIS 5900 by disconnecting and reconnecting the power
supply. Proceed to Configuring Printers on page 15 to set up your AXIS 5900 and the
connected printers for printing.
Description
Note: Java must be enabled in your web browser.
WEP security. The default setting is that WEP encryption is disabled. Select 64 Bit or
128 Bit security level. 128 Bit encryption level is the highest level of security but may
reduce the performance level.
Select the appropriate WEP key as specified by the network administrator
Enter the WEP keys (hexadecimal values) specified by the network administrator
When this parameter is enabled, the print server will not allow access to clients
attempting to transmit data without WEP encryption.
AXIS 5900