Using The Power Saving Function - Pentax MX-1 Operating Manual

Brightness Level
Adjust: Blue-Amber
Adjust: Green-Magenta
3
Use the four-way controller (45) to adjust the value.
Press the d/i button to reset the adjustment value.
4
Press the 4 button.
5
Press the 3 button.
The screen that was displayed before selecting the menu appears
again.

Using the Power Saving Function

5
You can save battery power by setting the display to dim automatically
when no operation is performed for a fixed time. After the power saving
function has been activated, the display returns to the ordinary
brightness if any button is pressed.
1
Use the four-way controller (23) to select [Power
Saving] in the [W Setting 3] menu, and press the four-
way controller (5).
A pull-down menu appears.
2
Use the four-way controller (23) to select the time
until the camera enters power saving mode.
Choose [2min.], [1min.], [30sec.], [15sec.], [5sec.] (default setting) or
[Off].
3
Press the 4 button.
The setting is saved.
186
Changes the brightness of the display (-3 to +3).
Adjusts the tone of colors between blue (B7) and
amber (A7).
Adjusts the tone of colors between green (G7) and
magenta (M7).