Developing | Images - Pentax MX-1 Operating Manual

2
Press the 3 button.
The screen returns to the previous screen.
3
Press the 4 button.
Proceed to Step 11 on p.155.

Developing | Images

You can convert captured RAW images into JPEG images, and save
them as a new file.
Only RAW images captured with this camera can be edited. RAW
images and JPEG images captured with other cameras cannot be edited
on this camera.
4
To Develop One RAW Image
1
Select a RAW image in playback mode, and press the
four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller (2345) to select
h (RAW Development), and press the 4 button.
The screen to select a development method is displayed.
3
Use the four-way controller (23)
to select [Develop single image],
and press the 4 button.
The parameters recorded in the image file
appear.
Proceed to Step 6 if you do not need to
change the parameters.
158
Develop single image Develop single image
Develop multiple images Develop multiple images
Cancel Cancel
OK OK