Developing Raw Images - Pentax K-70 Operating Manual

5
Use CD to move the
selection frame and press
E.
The segments to delete are
specified. (Multiple segments can
be deleted at once.)
Press E again to cancel the selection.
6
Press F.
The screen of Step 3 reappears.
4
7
Press E.
The save confirmation screen appears.
8
Select [Save] and press E.
t Memo
• Select dividing points in chronological order from the
beginning of the movie. When canceling the selected dividing
points, cancel each of them in reverse order (from the end of
the movie to the beginning). In an order other than specified,
you can neither select dividing points nor cancel the
selections of the dividing points.
92

Developing RAW Images

You can develop RAW images into JPEG images, and save
00 ' 05" 00 ' 05"
them as new files.
10 ' 00" 10 ' 00"
1
Select segments for deletion Select segments for deletion
2
3
4
Select k in the playback mode palette.
The screen for selecting the processing type appears.
Select the desired option and press E.
Select single
Develops an image.
image
Select multiple Develops up to 500 images with the
images same settings.
Develops up to 500 images in the
Select a folder
selected folder with the same settings.
When [Select single image] is selected, proceed to Step 6.
The image/folder selection screen appears.
Select image(s) or a folder.
Refer to Step 2 of "Deleting Selected Images" (p.84) for how
to select image(s).
Proceed to Step 5 if a folder is selected.
Press G.
The screen for selecting the parameter setting method
appears.