IBM TotalStorage DS4000 Hardware Maintenance Manual page 160

targets
version
132
IBM TotalStorage DS4000: Hardware Maintenance Manual
Router > sysVpdShowAll
===[ Vital Product Data ]===
-=[ Base Assembly ]-------
Name SAN Data Gateway Router
Mfg Pathlight Tech
UID 00:60:45:16:01:04
S/N 100111Assy HCO OTA08000H
Assy HCO OTA08000H
Board OntarioII 1.1
" S/N 08357659
Flash 2 Mbyte
Dram 32 Mbyte
RID Tag 100111
-=[ Slot 1 ]=-------------
Type 10772100 FCOSW
S/N 123456
UID 0060.45160065
HCO SC004120H
value =0 =0x0
Router >
The SDG Router maintains a list of target devices that are attached to the
I/O channels. The targets command lists each device that is currently
attached and provides a description of each device.
Router > targets
Idx Tdev Vendor Product Rev | Type Specific
------------------------------|-----------------------------------
0 0xc194a400 PATHLGHT SAN Router Local 0252 | Cmd/Cntrl Status 0h
2 0xc1ffc390 IBM 03570C11 5324 | Tape: Blk Size 32768 , flags 7h
3 0xc1ffc290 IBM 03570C11 5324 | Changer: flags 7h
value =4 =0x4
Router >
The following list describes the example fields:
Idx Device Index in the target list
Tdev An internal pointer, used for some diagnostic operations
Vendor Content of the Vendor ID field from the SCSI Inquiry Data
Product Content of the Product ID field from the SCSI Inquiry Data
Rev Content of the Revision ID field from the SCSI Inquiry Data
Type Specific For each device type, information pertinent to the device
The SDG Router has software that controls all functions. The version
command displays the revision of that operating software. The first line
displayed is the SDG Router firmware version. The lines that follow
pertain to the operating system software version.