Panasonic KX-T0141 Quick Installation Manual page 16

4 Before Site Survey
KX-T0141/KX-TDA0142
CS no. 1 CS no. 2
1 1
2 2
3 3
4 4
Note
If more than 1 CS is in Radio Signal Test mode, each CS must have a unique CS number.
4.
After setting the DIP switches, connect the CS to an AC adaptor/battery box using a power supply adaptor,
or connect it to the PBX.
WARNING
When installing or testing a product with an external AC adaptor, the AC adaptor should be
plugged into a wall outlet or floor-mounted AC outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.
Notice
If the Power Supply Select switch is set to ON in step 3, connect the CS to an AC adaptor/battery box.
If it is set to OFF, connect the CS to the PBX (KX-T0151/KX-TDA0152 only).
16 Quick Installation Guide
DIP Switch
OFF
1
2
3
4
5
6
CS no. 3 CS no. 4 CS no. 5
1 1 1
2 2 2
3 3 3
4 4 4
ON
CS Number Switch
Keep this switch at the default
"OFF" position. Otherwise, the
CS will not function.
Radio Signal
Test Switch
CS no. 6 CS no. 7 CS no. 8
1 1 1
2 2 2
3 3 3
4 4 4
CS no. 9
1
2
3
4
Document Version 2009-12