Using The Remote Controller; Receiver/Tape Mode - Onkyo TX-SR705 Instruction Manual

Remote Controller

Using the Remote Controller

As well as the AV receiver/AV amplifier, you can also
use the remote controller to control your other AV com-
ponents. The remote controller has a specific operating
mode for use with each type of component. Modes are
selected by using the REMOTE MODE buttons.

■ RECEIVER/TAPE Mode

In RECEIVER/TAPE mode, you can control the AV
receiver/AV amplifierand an Onkyo cassette recorder
connected via .
■ DVD Mode
By default, you can control an Onkyo DVD player in this
mode. By entering the appropriate remote control code,
you can control components made by other manufactur-
ers (see page 104).
■ CD/CDR/MD Mode
By default, you can control an Onkyo CD player in this
mode. By entering the appropriate remote control code,
you can control a CD player, MD recorder, or CD
recorder made by another manufacturer (see page 104).
■ DOCK Mode
This mode is for controlling an Apple iPod in an Onkyo
RI Dock.
By default, you can control an RI Dock that has a remote
control sensor such as DS-A2. When operating an RI
Dock with an connection, you can control it by
entering the appropriate remote control code (see
page 104).
■ TV and VCR Modes
With these modes, you can control a TV and VCR. You
must enter the appropriate remote control code first (see
page 104).
■ CABLE/SAT Mode
In CABLE/SAT mode, you can control a cable or satel-
lite TV receiver. You must enter the appropriate remote
control code first (see page 104).
■ ZONE 2 Mode
This mode is for controlling Zone 2 (see page 101).
1 Use the REMOTE MODE buttons to select
a mode.
2 Use the buttons supported by that mode
to control the component.
RECEIVER/TAPE mode: see right column
DVD mode: see page 17
CD/MD/CDR mode: see page 18
DOCK mode: see page 19
TV, VCR, SAT/CABLE modes: see page 106
Note:
Some of the remote controller operations described in
this manual may not work as expected with other com-
ponents.
RECEIVER/TAPE Mode
RECEIVER/TAPE mode is used to control the AV
receiver/AV amplifier. It can also be used to control an
Onkyo cassette recorder connected via
To set the remote controller to RECEIVER/TAPE
mode, press the [RECEIVER] REMOTE MODE
button.
1
2
3
4
5
6
7
8
9
1
bk
bl
.
bm
bn
bo
bp
bq
br
bs
bt
ck
15