Shutdown; Network Setup; Network; Figure 27 : Shutdown Screen - Panasonic WJ-HL204/G Operating Instructions Manual

You can save your changes by highlighting "Save" and pressing the
screen without saving the changes.

Shutdown

Highlight "Shutdown" in the System menu and press the
you to confirm whether or not you want to shut the system down.

Figure 27 : Shutdown screen

Network Setup

In the Setup screen, use the Left or Right arrow buttons to display the Network menu.

Network

Highlight "Network" in the Network menu and press the
will be able to change the Network, LAN and Web Browser settings.

Figure 29 : Network - Network screen

Highlight the box beside "Resolution" and press the
High" (D1), "High" (Half D1) and "Standard" (CIF). Press the
Note: The higher Quality and Resolution settings require higher Transfer Speed settings. The
transfer speed you set is the maximum speed. Depending on the network environment,
this speed may not be achieved.
The recorder supports two-way audio communication between a local system and Web browser.
Highlighting the box beside "Remote Audio Channel" and pressing the
audio channel that sends audio to the web browser. Selecting "Select From Browser" will send audio of the
channel selected from Web browser.
Note: Depending on network conditions, audio might be interrupted or out of synchronization
during transmission.
After selecting "Shutdown" and pressing the
appear telling you when it is safe to disconnect power.
Note: If you turn off the recorder without this Shutdown operation,
the last recorded video for maximum 60 seconds may be lost.

Figure 28 : Network menu

Highlight the first box beside "bps/ips". Press the Up
and Down arrow buttons to set the Transfer Speed from
50 kbps to 100 Mbps or from 1.00 ips to 25.00 ips.
Highlight the second box beside "bps/ips". You can
select the unit of measure for the transfer speed
between: "bps" and "ips". Press the
transfer speed.
Highlight the box beside "Quality" and press the
button. You can select the Quality from: "Very High",
"High", "Standard" and "Basic". Press the
set the Quality.
button. You can select the Resolution from: "Very
button. Selecting "Cancel" exits the
button. The "Shutdown" screen displays asking
button, a screen will
button. The Network setup screen displays. You
button to set the Resolution.
button allows you to select the
button to set the
button to
29