Turning On The Power; Initial Unit Setup; Figure 6 : Login Screen; Figure 7 : Logout Screen - Panasonic WJ-HL204/G Operating Instructions Manual

Turning on the Power

Connecting the power cord to the recorder turns on the unit. The Operate Indicator will light and initializing
will start. While the recorder is initializing, the front panel indicators (except the Operate Indicator) will blink.
The unit takes approximately 60 seconds to initialize.

Initial Unit Setup

Before using your recorder for the first time, you will want to establish the initial settings. This includes items
such as time and date, display language, camera, record mode, network and password. Your recorder can
be set up using various screens and dialog boxes.
Throughout the screens you will see " ". Highlighting the " " and pressing the
opportunity to reset that screen to its default settings.
Press the [MENU] button or move the mouse pointer to the top of the screen and then select " " (Login) in
the Live Monitoring menu to enter the setup screens. The Login screen appears.

Figure 6 : Login screen

Note: To assure the secure management of the system, changing the password from the default
setting is strongly recommended.
If you cannot use the front panel buttons, click the
password, and the virtual keyboard displays. See instructions below for using the virtual
keyboard.
To log the user out of the system, press the [
top of the screen and then select " " (Logout) in the Live Monitoring menu. The Logout
screen displays asking you to confirm whether or not you want to log out the current user.

Figure 7 : Logout screen

Select a User and enter the password by pressing the appropriate
combination of Camera number buttons and then the
password (default:1234) when logging in the "ADMIN" user (default) for the
first time.
button using the mouse to enter a
button or move the mouse pointer to the
MENU]
button gives you the
button. Enter the
21