Sony RCP-TX7 Operating Instructions Manual page 18

Menu Operations
Menu title Knob/button
GAMMA (2/2: GAMMA 3.5/4.0 buttons
INIT GAIN)
KNEE (3/3: WHITE ON/OFF buttons
CLIP)
LEVEL knob: –99 to 00 to +99
SHADING (WHITE V RED/GREEN/BLUE knobs: –99 to 00 to
SAW) +99
MATRIX (3/4) R-G knob: –99 to 00 to +99
(Factory setting: +65 for DXC-D30 or
+38 for DXC-D30P )
B-G knob: –99 to 00 to +99
(Factory setting: +28 for DXC-D30 or
+22 for DXC-D30P )
G-R knob: –99 to 00 to +99
(Factory setting: +31 for DXC-D30 or
+12 for DXC-D30P )
G-B knob: –99 to 00 to +99
MATRIX (4/4)
(Factory setting: +32 for DXC-D30 or
+15 for DXC-D30P )
B-R knob: –99 to 00 to +99
(Factory setting: +22 for DXC-D30 or
+12 for DXC-D30P )
B-G knob: –99 to 00 to +99
(Factory setting: +6 for DXC-D30 or
+15 for DXC-D30P )
SKIN GATE (3/3) POSI R-Y/B-Y knobs: –99 to 00 to +99
BLACK STR (2/3: POINT 1 knob: –99 to 00 to +99
STRETCH LEVEL) (Factory setting: –39)
POINT 2 knob: –99 to 00 to +99
(Factory setting: –41)
BLACK STR (3/3: POINT 1 knob: –99 to 00 to +99
COMPRESS LEVEL) (Factory setting: –77)
POINT 2 knob: –99 to 00 to +99
DIAG RESET button
REQ button
OTHERS (2/11: COPY COPY TO SLAVES button
TO SLAVES)
For details, see page
27.
OTHERS (8/11: TONE/ ON/OFF buttons
BARS TYPE)
BARS TYPE knob: SMPTE/SNG/FULL
FIELD 75%/FULL FIELD 100%(For
DXC-D30) or SPLIT/SNG/EBU 75%/
EBU 100% (For DXC-D30P)
OTHERS (9/11: –
SCREEN MODE)
18
Setting or operation
Select the slope of the initial part of the gamma curve for
low-brightness.
Select whether or not you will activate the white clip circuit.
Amount of white clip (As the value becomes larger, the
output level lowers.)
Amount of vertical white shading for R, G and B signals
R–G level of the linear matrix
R–B level of the linear matrix
G–R level of the linear matrix
G–B level of the linear matrix
B–R level of the linear matrix
B–G level of the linear matrix
R–Y and B–Y levels of the skin gate
Lower limit of the signal levels which activate the black
stretch function
Upper limit of the signal levels which activate the black
stretch function
Lower limit of the signal levels which activate the black
compress function
Upper limit of the signal levels which activate the black
compress function
Reset (erase) the camera's self-diagnosis data.
Press to request camera's self-diagnosis data. If an
abnormality has been detected, the data will be transferred
to the RCP and displayed. Change the menu page to
change data indications. (If there is no abnormality, no data
will be displayed.)
Copy the settings of the master unit to the slave units.
Select whether or not you will allow the camera to output a
1-kHz audio signal when color bars are displayed.
Select color bars output from the camera (not from the
CCU-TX7/7P).
Display the screen mode (4:3).