Panasonic KX-TDA30 User Manual page 68

1.4.2 Holding a Call
•
If Automatic Call Hold has been preprogrammed, you can put the current call on hold auto-
matically by pressing another CO, ICD Group or INTERCOM button to make or answer another
call.
•
For the Call Hold Retrieve operation using a PDN/SDN button, refer to "1.5.1 Primary Directory
Number (PDN)/Secondary Directory Number (SDN) Extension (KX-TDA100/KX-TDA200/
KX-TDA600 only)".
Holding in a System Parking Zone (Call Park)
You can put a call on hold in a common parking zone of the PBX so that any extension can retrieve the parked
call. You can use this feature as a transferring feature.
A call can be put into either a specified parking zone (Specified) or any idle parking zone (Auto). If a Call Park
button and Call Park (Automatic Park Zone) button have been established, you can select either way to park
by simply pressing the corresponding button.
When a call is parked automatically, or more than one call has been parked at the same time, you need to
specify the parking zone number to retrieve the required call.
To set
PT/PS
During a conversation
(Call Park)
Press Call Park.
PT/PS
During a conversation
TRANSFER
Press TRANSFER.
68 User Manual
5 2
Enter 52. Enter a specified parking
zone number (2 digits) or press
automatically.
If you hear a busy tone, enter another
parking zone number or press
parking zone no.
Specified
OR
Auto
to park at an idle parking zone
again.
C.Tone
On-hook.