Table of Contents
Advertisement
About Rhythm
Parameter
Rhythm: Rec Count
Rhythm: PlayCount
Rhythm: Stop
Rhythm: Level
Rhythm: Output
MAIN+SUB
26
Value
Explanation
Playing a Count-In When Recording ( Recording Count-
OFF
In)
You can have recording start after a count-in sound is played .
A count-in won't be sounded when a track for which Loop Sync is ON is being played back .
OFF
No count-in is played .
1MEAS
Recording starts after a one-measure count-in is played .
Playing a Count-In for Playback ( Playback Count-In)
OFF
You can have playback start after a count-in sound is played .
OFF
No count-in is played .
1MEAS
Playback starts after a one-measure count-in is played .
Stopping the Rhythm When the First Recording Ends
OFF
( Rhythm Stop)
You can make the rhythm sound stop when the fi rst pass of recording ends . The rhythm sound will stop when you
press the [REC/DUB/PLAY] pedal to begin looping (i .e ., when the RC-300 switches to overdubbing or playback) .
OFF
The rhythm will not stop when the fi rst pass of recording ends .
REC END
The rhythm will stop when the fi rst pass of recording ends .
Adjusting the Volume of the Rhythm Sound ( Rhythm
100
Level)
This adjusts the volume of the rhythm sound . You can also change this value with the RHYTHM[LEVEL] knob .
0–200
Volume of the rhythm sound
Setting the Output Jacks for the Rhythm Sound
( Rhythm Output Select)
You can select the output jacks to which the rhythm sound is output .
If desired, you can also make this setting apply to all phrase memories . g "Using the Same Output Jacks for All
Phrase Memories (Input/Track 1, 2, 3/Rhythm Output)" (p . 33)
MAIN
The sound is output from the MAIN OUTPUT and PHONES jacks .
The sound is output from the SUB OUTPUT jacks . The sound is not output from the MAIN
SUB
OUTPUT and PHONES jacks .
MAIN+SUB
The sound is output from the MAIN and SUB OUTPUT jacks and the PHONES jack .
- Quick Links:
- Rear Panel Connections
Hide quick links:
Advertisement
Table of Contents
