Auto Recording/Count-In Recording Functions - Boss RC-3 Loop Station Owner's Manual

Auto Recording/Count-In Recording Functions

"Auto recording" starts recording the moment you begin playing
your guitar or play back your audio player. "Count-in" sounds the
rhythm for one measure before recording starts.
1. Hold down the [TAP TEMPO] button for at least two
seconds.
The display will indicate " no
2. Use the [ ] / [ ] buttons to select the desired
recording mode, and then press the pedal to start
recording.
Display Mode Explanation
Normal Recording will begin the instant you press
no
recording the pedal.
The REC indicator will blink rapidly, and the
Auto RC-3 will enter recording-standby mode.
AU
recording When you begin playing, the REC indicator
will light and recording will start.
. "
Display Mode Explanation
The [RHYTHM ON/OFF] button will blink.
When you press the pedal, the REC indicator
will blink rapidly, and the rhythm will sound
for one measure. (You can stop by pressing
the pedal during this time.) When the one
Count-in
Ct
measure of playback has ended, recording
recording
will start. (The rhythm will continue
sounding even after recording has begun.)
For more about the rhythm settings, refer to
"About Rhythm" (p. 12).
The recording mode will be reset to Normal recording when you
turn off the power.
Basic Operation
11