Simultaneously Starting Recording When Sounds Are; Input (Auto Recording); Playing Only A Single Track (Single Track Play); Specifying How The Track Will Switch (Track Change Mode) - Boss RC-300 Loop Station Owner's Manual

Phrase Memory Settings
Parameter
Memory: Auto Rec
Memory: Single Tr
Play
Memory: Track
Change IMMEDIATE
Memory: Reverb
Level
22
Value Explanation

Simultaneously Starting Recording When Sounds are

OFF
Input ( Auto Recording)
"Auto recording" starts recording the moment you begin playing your guitar or play back your audio player .
OFF Recording will begin the instant you press the [REC/DUB/PLAY] pedal .
When you press the [REC/DUB/PLAY] pedal, the REC indicator will blink rapidly, and the
ON RC-300 will enter recording-standby mode . When you begin playing, the REC indicator will
light and recording will start .
Playing Only a Single Track ( Single Track Play)
OFF
Normally, the RC-300 plays back its three tracks simultaneously . However, if you turn on the phrase memory's "Single
Track Play" setting, only one track will play .
If Single Track Play is on, the track that's currently playing will stop when you
start playback of another track .
Track 1 Track 1
Track 2
Track 3
* If Track Change (p . 22) is set to "LOOP END, " the track will change at the end of the loop .
* To ensure that playback always takes place from the beginning of the phrase, you need to set Loop Sync (p . 22) to
"OFF . "
OFF Play back all tracks
ON Play back only a single track
Specifying how the Track will Switch ( Track Change
Mode)
You can specify how the tracks will be switched when using Single Track Play .
IMMEDIATE The change will occur immediately .
LOOP END The change will occur after playback has reached the end of the loop .

Adjusting the Reverb Depth (Reverb Level)

0
This adjusts the depth of the reverb . The reverb is applied to sounds for which the MAIN OUTPUT jacks have been assigned
as the output destination .
0–100 Reverb depth