Boss RC-300 Loop Station Owner's Manual page 31

GT->BASS
Parameter Value
FX:Level
0–100
50
FILTER settings
Parameter Value
OFF–100,
FX:Rate
50
4 MEAS–
FX:Depth
0–100
50
FX:Freq
50
0–100
FX:Resonance
1–10
7
FX:Level
0–100
80
DELAY settings
Parameter Value
Use this to choose the type of delay .
FX:Mode
SINGLE
SINGLE
PAN
FX:D.Time
400msec
1–600 msec,
1 MEAS–
FX:Feedback
0–100
20
FX:E.Level
0–120
50
LO-FI setting
Parameter Value
FX:Level
0–100
50
DISTORTION settings
Explanation Parameter
Adjusts the volume level of the
effect .
Explanation
Adjusts the rate of modulation .
Adjusts the depth of modulation .
Adjusts the cutoff frequency of
the filter .
Increasing this value will raise the
cutoff frequency .
Adjusts the intensity of the effect .
Adjusts the volume level of the
effect .
Explanation
A simple monaural delay .
Provides a tap delay effect that
divides the delay time between
the left and right channels .
Adjusts the delay time .
* If the note length exceeds the
upper limit for the delay time,
some fraction of that length
(1/2, 1/4, 1/8, etc .) will be used
for synchronization .
Adjusts the number of repetitions
for the delay .
Adjusts the volume level of the
delay .
Explanation
Adjusts the volume level of the
effect .
Value
Selects the type of effect .
FX:Mode
NATURAL OD
NATURAL OD
BLUES OD
OD-1
WARM OD
DISTORTION
MODERN DS
STACK
LOUD
METAL ZONE
60S FUZZ
FX:Drive
0–120
50
FX:Bottom
0
-50–+50
FX:Tone
-50–+50
0
FX:Level
0–100
50
Using LOOP FX
Explanation
Produces the natural sounding
distortion of a slightly overdriven
amp .
This is a unique overdrive that
faithfully reproduces the nuances
of picking .
The sound of the BOSS OD-1 . It
produces sweet, mild distortion .
A warm overdrive .
This is a sharp distortion with rich
sustain .
This is the sound of a large
high-gain amp .
This is the sound of a vintage
stack-type amp .
This distortion sound is ideal for
performing heavy riffs .
This is a distortion that emphasizes
the midrange .
This is a distortion that is
distinctively rough and heavy .
Adjusts the intensity of the
distortion .
Decreasing this value will produce
a sound with the low end cut, and
increasing this value will boost the
low end in the sound .
Adjusts the tone .
Adjusts the volume level for
DISTORTION .
31