palmOne Treo 650 Using Instruction page 63

CrowAce.book Page 61 Tuesday, November 9, 2004 10:02 AM
Sending an application over a Bluetooth wireless connection
1. Go to Applications .
2. Open the menus .
3. Select Send on the App menu.
4. Select the Send From pick list and select whether the application you want to send
is located on your Treo or on an expansion card.
5. Select the application you want to transfer. It cannot have a lock
6. Select Send.
7. Select Bluetooth, and then select OK.
8. Select the receiving device on the Discovery Results screen, and then select OK.
Receiving information over a Bluetooth wireless connection
1. Go to Applications and select Bluetooth
2. Select Bluetooth On.
3. If you already have a trusted pair with the other device, your Treo is ready to receive
the info. If you don't have a trusted pair with the other device, select the
Discoverable pick list and select Yes.
4. When the Send dialog box appears, select a category or expansion card. If you
don't select a category, the item goes in the Unfiled category.
5. Press Up to receive the information, or press Down
next to it.
.
to refuse it.
Connecting to devices with Bluetooth wireless technology :: 61
You can set your Treo to
receive Bluetooth wireless
connections when your
phone is off. However, keep
in mind that the Bluetooth
radio consumes battery
power even though your
phone is off.
1. Go to Applications and
select Bluetooth.
2. Select Bluetooth On.
3. Open the Options menu
and select Do not allow
wakeup. This toggles the
setting to Allow wakeup.
Check your battery level
before establishing a
Bluetooth wireless
connection. If the battery
level is low, you can't make
a Bluetooth wireless
connection.