palmOne Treo 650 Using Instruction page 62

CrowAce.book Page 60 Tuesday, November 9, 2004 10:02 AM
Creating trusted pairs
After you set up a connection with your computer or other accessory devices with
Bluetooth wireless technology, you may want to set up other trusted devices, such as
a friend's handheld. When your Treo recognizes a trusted device, it automatically
accepts communication, bypassing the discovery and authentication process.
1. Go to Applications
After you set up your
2. Select Setup Devices.
Bluetooth wireless
3. Select Trusted Devices.
connections and trusted
4. Select Add Device. The Discovery icon appears to indicate that the discovery
pairs, you can check the
process is active.
Allow only trusted devices
5. Select the device you want to add as a trusted device. If the device you want to add
to connect box for added
security protection.
does not appear on the discovery results list, select Find More to search again.
6. Enter the same passkey on your phone and the other device and select OK.
Be sure to close the
IMPORTANT: Some devices with Bluetooth wireless technology have a built-in
Bluetooth application when
passkey; others let you choose the passkey. In either case, you must use the same
you're done setting up
passkey on both the other device and your phone. See the documentation for the
devices and creating
trusted pairs.
device with Bluetooth wireless technology for additional information.
7. Select Done.
Sending information over a Bluetooth wireless connection
You can send an individual entry or a category. When you send a category, the items
within the category appear as unfiled items on the receiving device.
1. Open an application.
2. Select the entry or category you want to send.
3. Open the menus
4. Select Send on the leftmost menu.
5. Select Bluetooth, and then select OK.
6. Select the receiving device on the Discovery Results screen, and then select OK.
60 :: Connecting to devices with Bluetooth wireless technology
and select Bluetooth .
.