Installing The Battery - palmOne Treo 650 Using Instruction

CrowAce.book Page 11 Tuesday, November 9, 2004 10:02 AM

Installing the battery

1. Press the Battery Door Release button and slide the battery door downward to
remove it from your Treo.
2. Align the metal contacts on the battery with the contacts inside the battery
compartment.
3. Insert the battery into the compartment at a 45 degree angle and then press
it into place.
4. Slide the battery door onto the back of the phone until it clicks into place.
5. When the Welcome screen appears, follow the onscreen instructions to set up
your Treo 650.
A. Battery Door Release button
B. Battery contacts
C. Notch
D. Phone contacts
A
B
C
D
Installing the battery :: 11