Screen - palmOne Treo 650 Using Instruction

CrowAce.book Page 171 Tuesday, November 9, 2004 10:02 AM

Screen

The screen appears blank
1. When a call lasts longer than one minute, the screen automatically turns off.
Press any key except Power/End to wake up the screen. Pressing Power/End
hangs up the call.
2. Look closely at the screen. If you can see a dim image, try adjusting the
screen brightness (see "Adjusting the brightness" on page 149).
3. If that doesn't work, perform a soft reset (see "Performing a soft reset" on
page 168).
4. If that doesn't work, connect the Treo to the AC charger (see "Charging the battery"
on page 12) and perform a soft reset again.
5. If that doesn't work, perform a hard reset (see "Performing a hard reset" on
page 169).
The screen doesn't respond accurately to taps or activates
wrong features
1. Go to Applications and select Prefs
2. Select Touchscreen.
3. Follow the onscreen instructions to align the screen.
4. Select Done.
.
To find carrying cases that
protect the screen and
other useful accessories,
visit www.palmOne.com.
Screen :: 171