Charging The Battery - palmOne Treo 650 Using Instruction

CrowAce.book Page 12 Tuesday, November 9, 2004 10:02 AM

Charging the battery

Before using your Treo 650 smartphone, you need to charge the battery. It may not
turn on at all when you first remove it from the box. We recommend four hours for a
full charge, or until the indicator light is solid green.
Battery consumption varies
1. Plug the AC charger into a wall outlet. If necessary, connect an adapter.
based on personal usage.
2. Connect the charger cable to the bottom of the Treo. Make sure the arrow on the
Consumption factors
include signal strength,
connector is facing up, toward your Treo screen.
speakerphone usage, and
whether calls are data or
voice calls.
When your Treo is
connected to a power
source, the indicator light
glows solid (versus
flashing), and the color
A. Indicator light
of the light indicates the
charging state.
3. To confirm your Treo is charging, check the indicator light.
• When the indicator light is solid red, your Treo is charging.
• When the indicator light turns solid green, your Treo is fully charged.
• If the indicator light does not turn on when you connect your Treo to the AC
charger, double-check the cable connection and the electrical outlet to which
it is connected.
12 :: Charging the battery
A