Safety And Maintenance; Installing/Removing Push Bar; Installing Push Bar - Invacare 9000 Topaz Owner's Operator And Maintenance Manual

SECTION 10—OPTIONS
Height Adjustment Assembly
Hole
FIGURE 10.8 Installing Telescoping I.V. Rod - Repositioning Upper Mounting Bracket

Safety and Maintenance

1. Make sure the telescoping I.V. rod is tightly locked before placing I.V. medication on
the rod.
2. The telescoping I.V. rod is designed for the specific purpose of supporting I.V.
medication only. DO NOT use it to support objects other than I.V. medication.
3. Check weekly to make sure the telescoping I.V. rod/O
wheelchair frame. If there is any looseness whatsoever, DO NOT use until the
corrective adjustments have been made.
4. The telescoping I.V. rod/O

Installing/Removing Push Bar

NOTE: For this procedure, refer to FIGURE 10.9.
NOTE: The 9000 Topaz is folded for either storage or transporting. The push bar must be removed
before folding the wheelchair.

Installing Push Bar

1. Insert one (1) push bar support into one (1) back cane handle.
NOTE: It may be necessary to move the back cane side-to-side in order to align the remaining push
bar support with the back cane handle.
9000 Topaz™Wheelchair
Inner Tube
Outer Tube
Phillips Screw
holders clean easily with any household glass type cleaner.
2
Upper Mounting Bracket
(Shown Rotated 180°)
holder is tightly secured to the
2
50
Outer Tube
Part No. 1100869