Related Manuals for Prem-I-Air TC-N9KM
Summary of Contents for Prem-I-Air TC-N9KM
- Page 1 Mobile Air Conditioner Instruction Manual Model TC-N9KM Please read and retain these instructions for future reference...
-
Page 2: Specification
SPECIFICATION Model no. TC-N9KM Cooling capacity 8500 BTU 2490 W Power/Ampere consumption for 830W/ 3.7A cooling* Air volume (max. speed) 350 m Humidity removal capacity 1.2 L/hr Power supply 220-240V~, 50Hz Compressor Rotary Refrigerant R410a Fan speed Timer Mechanical switch 1 – 8 hours Working temperature Cooling 18 - 32ºC... -
Page 3: Before Use
BEFORE USE Important Safety Instructions 1. Transport & store the unit in an upright position only. Leave it in an upright position for at least 3 hours before first use. 2. Always place the unit on an even, level surface. 3. - Page 4 PARTS Front Back Control Panel Air filter Air outlet Air inlet Carry handle Exhaust air outlet Caster Cord storage Water stopper / drainage point Accessories 10. Indoor adaptor - for insertion over hose and into back of the air conditioner. Outdoor adaptor - for insertion over hose and into foam strip (or...
-
Page 5: Installation
INSTALLATION Installation of the exhaust pipe The unit is a portable air conditioner, which can be moved from room to room. Using the foam strips • These are not suitable for hinged window systems Foam strips • Place the foam window strips against the window. Mark and cut them to size if necessary. •... -
Page 6: Installing The Exhaust Hose
Installing the exhaust hose • Use only the hose provided and clip exhaust hose and unit adaptor to the back of the air conditioner. • Avoid kinks and bends in the exhaust hose as this will cause expelled moist air to build up causing the unit to overheat and shut down. -
Page 7: Installation Of The Carbon Filter
Installation of the carbon filter Remove the filter frame from the unit. Separate the filter fixer from the filter frame. Remove the active carbon filter from its plastic bag. Insert the active carbon filter into the filter frame. Fix the filter by reassembling the fixer onto the filter frame. - Page 8 OPERATING INSTRUCTIONS For Maximum Efficiency • Close doors and windows. • Keep curtains and blinds closed during the sunniest part of the day. • Regularly clean filters. • Once room has reached the desired conditions, reduce temperature and ventilation settings. Cooling only model 1.
- Page 9 DRAINAGE During the process of cooling, some water will be extracted from the air into the unit. If the reservoir is full: On the mechanical model the compressor will stop. The fan will continue to circulate the air. The ‘FULL WATER’ indicator will illuminate to remind you.
-
Page 10: Maintenance
MAINTENANCE Always switch off and unplug the air conditioner from the mains before cleaning. To maximize the efficiency of the air conditioner clean regularly. Cleaning the housing Use a soft, damp cloth to wipe the body clean. Never use aggressive chemicals, gasoline, detergents, chemically treated cloths, or other cleansing solutions. These could all damage the unit casing. -
Page 11: Bs Plug Wiring
BS PLUG WIRING Wiring Instructions: Should it be necessary to change the plug please note the wires in the mains lead are coloured in accordance with the following code : BLUE - NEUTRAL BROWN - LIVE GREEN AND YELLOW - EARTH As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. -
Page 12: Service And Warranty
SERVICE & WARRANTY • Do not operate the unit with a damaged cord or plug, after the unit malfunctions, has been dropped or damaged. • For your convenience, record the complete model number and product name (located on the Product Identification Plate), the date you purchased the product, and attach your purchase receipt as proof of purchase.