Advertisement
Z_O E_watds S treet. S E
C',eveie nd.Tennessee 37311
Te!:422-_72-3333
7-ax: _23-_78-67:0
19. ANTI-TIP BRACKET INSTALLATION
- With the unit installed in the final location, establish left side and back of the unit.
- Locate left bracket 5/8" (1.58 cm) in from the left of the unit.
- Locate the right bracket 27 7/8" (70,80 cm) to the right of the left bracket.
- Locate the rear of both brackets flush to the back of the unit ifa backsplash is not used.
* If a lighted backsplash is used, move back of brackets forward 1/8" (.318 era), If a non-lighted
backsplash is used, move back of brackets forward 1/4" (.635 eta).
- NOTE: Leg levelers must be screwed out I 1/2 turns. If the flOorwill not accept the wood
screws supplied, alternate fasteners taust be supplied by the installer.
_TERNA_ SCREW HOLE tFw_0
t_
27',t"(70.80 e rni
%" (1.58 cm)
20. LEVEL RANGE
- Free-Standing: Adjust the leveler feet to level range with the countertop.
- Slide-In: Adjust the leveler feet to takesome of the weightoffof the ccuntertop.
- Unit must be level for optimum baking performance.
i---
r-'[_o
I _,
I_ ! o©
B
21. CONNECT BLOWER ELECTRICAL
- Connect the blower power cord to the power cord on the range. (See illustration).
BLOWER
!!
POWERCORD
(
1
Advertisement
