Table of Contents
Advertisement
Using Your Cooktop
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Suggested Heat Settings
Grilling
The size and type ofcookware will affect the heat setting. For
The grill accessory consists of two black grill grates, a grill
information on cookware, refer to "'Cooking Made Simple"
element and a grill liner pan.
booklet.
__
The controls offer flexibility in heat setting selection. An
infinite number of settings exist between H and L. At the H
setting, a detent can be felt.
_
_I///l_
_
The following suggested settings are provided as guidelines.
ii
To start foods cooking
:
567
quickly, to bringliquids to _S-_%
_
lf_-_ - I'_- I_- !_._ IN[ _;_
a boil. Used for preheating _o_). '*4,,.jA/==_
the grill and grilling many
foods.
i
:
_!0:
For browning of foods and
(Med. rapid boil of large amounts
Hi)
of food.
S6
7
To Install Grill
_1_5: For most frying, and slow
_
'*
(Med.)boil of large amounts of
OFF
1. Before installing grill components, be certain surface
food.
controls are OFF.
2. Place the grill liner pan into an empty basin pan with the
,2-3; To continue cookingfoods
opening next to the terminal block. The grill liner pan
(Med. started on higher settings,
must be used since it supports the grill element.
Lo)
3. Position the grill element with the terminal plug towards
i!!
4$
s
"¢1_
To keep foods warm and '_,Ag_;*
__
the terminal receptacle. Slide the element towards the
......
to melt butter or
L_.
_
_
receptacle until the terminal plug is completely engaged.
chocolate.
The grill element should rest flat on the side ledges of the
grill liner pan.
4. Place the black grill grates on the top of the basin pan.
Operating the Gas Burners During a
To Remove Grill
Power Failure
1. Remove grill components when they are cool. Be sure
To light, hold a lighted match to the desired surface burner
control switches are in the OFF position.
near the burner ports. Push down and slowly turn the control
2. Remove grill grates.
knob counterclockwise to the H setting.
3. To remove grill element, lift the side opposite of the
terminal plug until the top of the element is about ]/2 inch
above the cooktop. (Note: Lifting the element too high
while still engaged in the receptacle could damage the
terminal plug.) To disengage terminal, gently pull from
the terminal receptacle. Lift out when fully unplugged.
Advertisement
Table of Contents
