Compare; Store Multi; Multi Edit Job Directory - Yamaha SY77 Operating Manual

When you are in edit mode but have have not yet
modified the data, a small square
the left of the multi number to indicate that the voice
has not yet been edited. If the data is edited in any
way, this will change to a inverse "E".
When you press EXIT or use the JUMP button to exit
Multi Edit mode after editing the data, the top line of
the display will ask "AUTO-STORE MUILTI?"
The LCD will show the first seven characters of the
multi names in the currently selected internal or card
multi memory. The multi name displayed in inverse
indicates the multi memory into which the edited
data will be stored.
Summary: The parameters of Multi Edit mode are
divided into the jobs shown in this job directory.
Procedure:
From: multi play mode
Select: EDIT
Specify: the desired multi edit job and press
ENTER.

Compare

is displayed at

Store multi

Multi edit job directory

(JUMP #300)
(JUMP #400)
If you want to see and hear the original data press
EDIT (COMPARE) and the inverse "E" will change
to a "C" indicating that you are in compare mode.
Note: While comparing, EXIT, mode select, page,
cursor, JUMP, COPY, and some of F1-F8 will
not function.
1. Use INTERNAL or CARD to specify the multi
memory, and select the multi memory 1-16 in
which you want to store your newly edited multi.
2. Press F8 (Go), and the bottom line will ask "Are
you sure !" (Yes or No)".
3. If you are sure you want to store the edited
multi, press +1/YES and the bottom line of the
LCD will show "Store completed". If you decide
not to store, press -1/NO and the bottom line of
the LCD will show "Store cancelled".
4. You will then return to multi play mode or the
jump destination.
This area shows the number and name of the
selected multi.
Move the cursor in this area to select a job and
press ENTER to go to the selected job.
MULTI EDIT MODE
#400
161