Configuring The Access Point - Edimax EW-7203APg Manual

3.2 Configuring the Access Point

This Access Point supports Client, AP, Repeater and Bridge modes. "Client
Mode" is used to let a network device with only wired Ethernet function to
have wireless LAN communication capability. It provides both Ad Hoc and
Infrastructure modes for the "Station Mode". With "Station-Ad Hoc mode",
it can let your network device join a wireless LAN with peer-to-peer
communication. With "Station-Infrastructure mode", it can let your network
device join a wireless LAN through an access point. "AP Mode" provides
pure access point function. The simplest way to build up a wireless LAN is
to use "AP Mode". If you want a repeater to bridge with another reapter and
provide connection service for other wireless station at the same time, you
have to set the access point to "Repeater mode". You can use two access
points with "P2P mode" to bridge two wired Ethernet networks together. If
you want to bridge more than two wired Ethernet networks together, you
have to use enough access points with "PMP mode". An access point with
"P2P mode" or "PMP mode" can only be used to bridge wired Ethernet
networks together. It can't accept connection from other wireless station at
the same time.