Toshiba RAV-SM2242DT-E Service Manual page 58

9-1-5. Wiring and Setting of Remote Controller Control
2-remote controller control
(Controlled by 2 remote controllers)
This control is to operate 1 or multiple indoor units
are operated by 2 remote controllers.
(Max. 2 remote controllers are connectable.)
• When connected 2 remote controllers
operate an indoor unit
Remote controller
switch (Master)
Sold
separately
A B
A B
Indoor unit
1 2 3
1 2 3
Outdoor unit
Remote controller
switch (Sub)
Sold
separately
A B
Remote controller cables
(Procured locally)
Terminal block for
remote controller cables
(Setup method)
One or multiple indoor units are controlled by
2 remote controllers.
(Max. 2 remote controllers are connectable.)
<Wired remote controller>
How to set wired remote controller
as sub remote controller
Change DIP switch inside of the rear side of the
remote controller switch from remote controller
master to sub. (In case of RBC-AMT32E)
Remote controller (Inside of the rear side)
1 2
[Operation]
1. The operation contents can be changed by Last-
push-priority.
2. Use a timer on either Master remote controller or
Sub remote controller.
– 58 –
1 2
Sub remote
controller
Master remote
controller
1 2
DIP switch