Toshiba RAV-SM2242DT-E Service Manual page 103

No. Part name
1 Fan <Fan/Fan case>
assembly
1) Take off screws (2 positions) of the electric
(Continued)
parts box cover.
2) Remove the electric parts box cover.
3) Cut the bundling band (3 positions) which
binds the fan motor lead wires.
4) Remove yellow (F1), blue (F2) and orange (F3)
Faston terminals of the fan motor lead wires.
5) Remove FAN1 (White), FAN2 (Blue) and FAN3
(Red) connectors of the fan motor.
6) Take off screws
(Arrow mark indicating position) of the cabinet.
(M5 screw: 8 positions)
7) Remove the temperature sensor lead wire from
the cord clamp at the rear side of the cabinet.
8) Put the removed electric parts box on the product.
9) Remove lead wires of the fan motor from the
cord clamp in the fan assembly.
10) Take off screws (Arrow mark indicating
11) Pull out the fan assembly (a fan) toward you.
Screw
Work procedure
Faston terminal
3)
4)
Bundling band Bundling band Bundling band
position) of the fan assembly.
(M5 screw: 3 positions)
7)
Cord clamp Cord clamp Cord clamp
9) Cord clamp Cord clamp Cord clamp
10)
Screw Screw
Screws Screws Screws
Fan motor lead wire Fan motor lead wire Fan motor lead wire
– 103 –
Remarks
Fan motor lead wire
5) 5) 5)
Connector Connector Connector
6) 6) 6)
Screws Screws Screws
Electric parts box
8) 8) 8)
11) 11) 11)
Pull out it toward you Pull out it toward you Pull out it toward you