Toshiba Satellite Pro T110DD Maintenance Manual page 173

Chapter 4 Replacement Procedures
Removing a Bluetooth module
The following describes the procedure for removing a Bluetooth module (See Figure 4-6-2).
1. Disconnect the Bluetooth cable f from the connector on the system board.
2. Remove the Bluetooth module from the hook on the Base Assembly.
Installing a Bluetooth module
The following describes the procedure for installing a Bluetooth module.
1. Connect the Bluetooth cable to the connector on the system board.
2. Insert the Bluetooth module into the hook on the Base Assembly.
Satellite T110D / Satellite Pro T110D / PORTEGE T110DMaintenance Manual (960-Q08)
Figure 4-6-2 Remove a Bluetooth Module
21