Table of Contents
Advertisement
4. Press {SET}.
5. Press {MENU}.
FOR ENGLISH USERS:
If you want to change the language setting
to English, proceed as follows.
1. Press {MENU}.
2. Press {#}, then {4}{8}.
3. Press {A} or {B} repeatedly to select
English.
4. Press {SET}.
5. Press {MENU}.
Code #51 (KX-FP145 only): Setting the
mailbox 1 password
BOX1 PASSWORD
ID=
To prevent other users from retrieving your
messages, program a password for mailbox 1.
1. Press {MENU}.
2. Press {#}, then {5}{1}.
3. Enter a 3-digit number except a number
using digits 0 or 7.
L The default ID is "555".
4. Press {SET}.
5. Press {MENU}.
Code #52 (KX-FP145 only): Setting the
mailbox 2 password
BOX2 PASSWORD
ID=
To prevent other users from retrieving your
messages, program a password for mailbox 2.
1. Press {MENU}.
2. Press {#}, then {5}{2}.
3. Enter a 3-digit number except a number
using digits 0 or 7.
L The default ID is "555".
4. Press {SET}.
5. Press {MENU}.
Code #54 (KX-FP145 only): Changing the
recording time for your TAD/FAX greeting
message
GREETING TIME
=16s
[±]
"16s" (default): Maximum recording time is 16
seconds.
"60s": Maximum recording time is 60 seconds.
See page 36 for details.
7. Programmable Features
Code #55 (KX-FP145 only): Greeting
message for mailbox 1
BOX1 GREETING
CHECK
[±]
See page 40 for details.
Code #56 (KX-FP145 only): Greeting
message for mailbox 2
BOX2 GREETING
CHECK
[±]
See page 40 for details.
Code #62: Setting the line mode
LINE MODE
=CO
[±]
"CO" (default): PSTN connection.
"PBX": PBX connection.
Code #67 (KX-FP145 only): Setting the
incoming message monitor
ICM MONITOR
=ON
[±]
To hear an incoming message (ICM) from the
speaker when the answering device is recording
the message.
"ON" (default): You can monitor the incoming
message.
"OFF": Deactivates this feature.
Code #68: Setting the Error Correction Mode
(ECM)
ECM SELECTION
=ON
[±]
This feature is available when the
transmitting/receiving fax machines are ECM
compatible.
"ON" (default): To send a fax even if there is static
interference on the telephone line.
"OFF": Deactivates this feature.
Note:
L You cannot change the setting when received
documents are in memory.
Code #69: Making fax transmission faster
EXPRESS MODE
=OFF
[±]
"ON": The fax transmission speed will be faster.
"OFF" (default): Deactivates this feature.
This feature is available when the
transmitting/receiving machines are compatible.
47
Advertisement
Table of Contents
