Battery Precautions; Setting The Clock - Jensen JMC-1100 Owner's Manual

2. Insert two (2) AAA size batteries (not included) into the battery compartment as the polarity
markings inside the battery compartment.
3. Replace the battery compartment door.
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the
battery compartment. A reversed battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old
batteries with fresh ones.
4. If the batteries in the device are consumed or the device is not to be used for a long
period of time, remove the battery to prevent damage or injury from possible battery
leakage.
5. Do not try to recharge the battery not intended to be recharged; it can overheat and
rupture. (Follow battery manufacturer's directions.)
6. Do not dispose of batteries in fire. Battery may explodes or leak.
7. Clean the battery contacts and also those of the device prior to battery installation.

SETTING THE CLOCK

1. Make sure the unit is in STANDBY mode.

BATTERY PRECAUTIONS

10
OPERATING INSTRUCTIONS